Use the following steps to assign the MIX IN signal to the Phones output only:
1. Press SETUP.
2. Press F2 (OUTPUT).
3. Press CURSOR right (>) to select "MIX IN."
4. Turn the VALUE dial to move the marker to so it lines up with "PHONES."
5. Press EXIT when finished. The setting is stored automatically.
1. Press SETUP.
2. Press F2 (OUTPUT).
3. Press CURSOR right (>) to select "MIX IN."
4. Turn the VALUE dial to move the marker to so it lines up with "PHONES."
5. Press EXIT when finished. The setting is stored automatically.