Setting the proper Trigger Type for a pad is crucial for optimum trigger results. By default, these settings are already assigned to the pads that come with the kit, however, you may be adding a new or different type of pad which would need the proper Trigger Type selection assigned.
Here's how to set the Trigger Type for a pad in the TD-9;
- Press SETUP.
- Press F1 (TRIG).
- Press F1 (TYPE).
- Hit the pad that you'd like to set the Trigger Type for.
- Turn the VALUE dial to select the Trigger Type.
For example, for the CY-12RC, choose "CY12RC." - Repeat Steps 4 and 5 for any remaining pads if needed.
- Press KIT when you're finished.
The new settings are saved automatically.