Setting the proper Trigger Type for a pad is crucial for optimum trigger results. By default, these settings are already assigned to the pads that come with the kit, however, you may be adding a new or different type of pad which would need the proper Trigger Type selection assigned.
Here's how to set the Trigger Type for a pad in the TD-9;
1. Press SETUP.
2. Press F1 (TRIG).
3. Press F1 (TYPE).
4. Hit the pad that you'd like to set the Trigger Type for.
5. Turn the VALUE dial to select the Trigger Type. For example, for the CY-12RC, choose "CY12RC."
6. Repeat Steps 4 and 5 for any remaining pads if needed.
7. Press KIT when you're finished. The new settings are saved automatically.
Here's how to set the Trigger Type for a pad in the TD-9;
1. Press SETUP.
2. Press F1 (TRIG).
3. Press F1 (TYPE).
4. Hit the pad that you'd like to set the Trigger Type for.
5. Turn the VALUE dial to select the Trigger Type. For example, for the CY-12RC, choose "CY12RC."
6. Repeat Steps 4 and 5 for any remaining pads if needed.
7. Press KIT when you're finished. The new settings are saved automatically.