The following procedure will clear the internal memory and reload the factory settings:
CAUTION: All USER information will be lost!!! Be sure to back up any information you wish to keep.
- While holding down the VARIATION INC/+ + DEC/- plus TONE 7 / ORGAN/CLAVI) buttons and turn on the AX-Synth.
NOTE: The display will show the "FCt" message and the WRITE button will begin flashing. - Press the WRITE button to load the factory settings.
NOTE: All indicators will begin flashing. - Wait until the "dne" message appears in the display, then switch the AX-Synth off, wait a few seconds, and switch it back on.
Note: Never switch off the AX-Synth while the WRITE button is still lit, doing so may damage the unit.