The following procedure will clear the internal memory and reload the factory settings:
(CAUTION!!!!: All USER information will be lost!!! Be sure to back up any information you wish to keep!!!)
1. Turn the EM-15 off.
2. While holding down the USER PROGRAM/WRITE button, turn the EM-15 back on. Keep holding down the button until you see the message "Factory!" displayed in the screen. When "Factory!" is displayed, the factory settings have been loaded.
NOTE: Never turn off the power during a Factory Reset. This may result in corrupted internal data and may prevent the power from being turned on again.
(CAUTION!!!!: All USER information will be lost!!! Be sure to back up any information you wish to keep!!!)
1. Turn the EM-15 off.
2. While holding down the USER PROGRAM/WRITE button, turn the EM-15 back on. Keep holding down the button until you see the message "Factory!" displayed in the screen. When "Factory!" is displayed, the factory settings have been loaded.
NOTE: Never turn off the power during a Factory Reset. This may result in corrupted internal data and may prevent the power from being turned on again.