Dropout problems may be solved by lowering the trigger MASK TIME, which is the
time that must pass before another sound can be triggered. Or, by lowering the
SCAN TIME, which is the speed of the processors scan time. Use the following
procedure to modify these settings:
1) Press EDIT.
2) Use the SELECT button to select the SYSTEM parameters.
3) Use the UP [^] and DOWN [v] buttons to select TRIG MASK TIME or TRIG SCAN
TIME.
4) Use PATCH/VALUE buttons to adjust the value.
5) Press EDIT to return to Play mode.
Lowering these settings will minimize the chance of dropouts when two pads are
played simultaneously.
time that must pass before another sound can be triggered. Or, by lowering the
SCAN TIME, which is the speed of the processors scan time. Use the following
procedure to modify these settings:
1) Press EDIT.
2) Use the SELECT button to select the SYSTEM parameters.
3) Use the UP [^] and DOWN [v] buttons to select TRIG MASK TIME or TRIG SCAN
TIME.
4) Use PATCH/VALUE buttons to adjust the value.
5) Press EDIT to return to Play mode.
Lowering these settings will minimize the chance of dropouts when two pads are
played simultaneously.