Use the following procedure to set the MIDI channel on the JX-8P:
1) Press EDIT MIDI.
2) Select Function number 11 using the Tone Selector buttons.
3) Use the EDIT KNOB to change the value to the desired RX/TX channel.
MIDI settings must be written into internal memory:
1) Set the protect switch on the back to OFF.
2) Press WRITE. The display will read WRITTEN MIDI, then return to play mode.
3) Return the protect switch to ON.
1) Press EDIT MIDI.
2) Select Function number 11 using the Tone Selector buttons.
3) Use the EDIT KNOB to change the value to the desired RX/TX channel.
MIDI settings must be written into internal memory:
1) Set the protect switch on the back to OFF.
2) Press WRITE. The display will read WRITTEN MIDI, then return to play mode.
3) Return the protect switch to ON.