Use the following procedure to edit the FX settings:
1) In the Play mode, use PATCH /VALUE [-] or [+] to select a Patch (1-99).
2) Press EDIT to enter the Edit mode.
3) Press SELECT so the FX/PEDAL parameter group LED is lit.
4) Press the UP or DOWN CURSORS to select the effect parameter you wish to
edit.
5) Use PATCH/VALUE [-] or [+] to change the value.
6) Repeat steps 3-5 to finish making the other effect settings for the Patch.
1) In the Play mode, use PATCH /VALUE [-] or [+] to select a Patch (1-99).
2) Press EDIT to enter the Edit mode.
3) Press SELECT so the FX/PEDAL parameter group LED is lit.
4) Press the UP or DOWN CURSORS to select the effect parameter you wish to
edit.
5) Use PATCH/VALUE [-] or [+] to change the value.
6) Repeat steps 3-5 to finish making the other effect settings for the Patch.