Force initializing will erase all of the data on the internal drives and is
usually performed as a last resort to accessing the drives. Use the following
procedure:
1) Ensure the unit is turned off.
2) Hold SHIFT and MARKER 5 while powering on.
3) Press EXECUTE.
4) Repeat this process for SCSI B once SCSI A has been initialized.
usually performed as a last resort to accessing the drives. Use the following
procedure:
1) Ensure the unit is turned off.
2) Hold SHIFT and MARKER 5 while powering on.
3) Press EXECUTE.
4) Repeat this process for SCSI B once SCSI A has been initialized.