Use the following procedure to edit Instruments in Realtime Record:
1) Press PATTERN.
2) Press the 3 button to enter Realtime Record.
3) If a menu is not displayed, press EXIT followed by 3.
4) Press START/STOP to start your pattern.
5) Press CURSOR PAGE button to display an editing screen.
6) Press the PARAMETER SELECT to display the desired Parameter. The available
choices are $PITCH, $DECAY, $NUANCE, and $PAN.
7) Hold the Pad of the Instrument you wish to change while moving the VALUE
SLIDER, pressing the VALUE -1/OFF +1/ON buttons or using the number pad. All of
the changes will be recorded into your pattern.
1) Press PATTERN.
2) Press the 3 button to enter Realtime Record.
3) If a menu is not displayed, press EXIT followed by 3.
4) Press START/STOP to start your pattern.
5) Press CURSOR PAGE button to display an editing screen.
6) Press the PARAMETER SELECT to display the desired Parameter. The available
choices are $PITCH, $DECAY, $NUANCE, and $PAN.
7) Hold the Pad of the Instrument you wish to change while moving the VALUE
SLIDER, pressing the VALUE -1/OFF +1/ON buttons or using the number pad. All of
the changes will be recorded into your pattern.