Sounds in the R-5 Drum Machine can be set to play out of the individual
outputs. Use the following procedure to assign a sound to the individual
outputs:
1) Press EDIT SOUND followed by 1.
NOTE: If '1' is not one of the menu options, press EXIT followed by 1.
2) Press the pad that corresponds to the sound you wish to assign to a Multi
Out.
3) Press the PARAMETER SELECT button so that 'OUTPUT' is displayed.
4) Use the VALUE SLIDER or -1/OFF +1/ON buttons to change the current value to
MULTI (1-4) as desired.
outputs. Use the following procedure to assign a sound to the individual
outputs:
1) Press EDIT SOUND followed by 1.
NOTE: If '1' is not one of the menu options, press EXIT followed by 1.
2) Press the pad that corresponds to the sound you wish to assign to a Multi
Out.
3) Press the PARAMETER SELECT button so that 'OUTPUT' is displayed.
4) Use the VALUE SLIDER or -1/OFF +1/ON buttons to change the current value to
MULTI (1-4) as desired.