You can save all of your settings to an external MIDI device such as a computer or hardware sequencer by using the following bulk dump procedure:
1. Connect the MIDI out of the U-220 to the MIDI in of the external device (sequencer).
2. On the U-220, press the DATA button.
3. CURSOR to "Bulk" and press ENTER.
4. Use the CURSOR to select "All."
5. On the sequencer, begin recording and on the U-220, press ENTER.
1. Connect the MIDI out of the U-220 to the MIDI in of the external device (sequencer).
2. On the U-220, press the DATA button.
3. CURSOR to "Bulk" and press ENTER.
4. Use the CURSOR to select "All."
5. On the sequencer, begin recording and on the U-220, press ENTER.