Use the following procedure to set up a VS-Series product to burn a CD with the VS-CDR:
1. With all equipment turned off, connect the SCSI port of the VS-CDR to the SCSI port of the VS product.
2. Attach the terminator to the remaining SCSI port on the VS-CDR. If you are using multiple SCSI devices, connect them to the CD-R drive and terminate the last device in the chain.
3. Set the ID numbers of each SCSI device so that they each are on different numbers (VS products default to SCSI ID #7).
4. Turn on the power in the following order: VS-CDR, VS product, audio equipment.
NOTE: If the VS-CDR is not recognized by the VS-Series product, be sure that the product is running at it's latest version. Version updates can be found here: