It is possible to store settings into three different memory locations in the PW-10. Use the following steps to do so:
1. Adjust the TYPE, WAH RANGE, and DRIVE knobs until the desired sound is achieved.
2. Press and hold the MANUAL/MEMORY button for at least two seconds, then release it- (the MEMORY indicator will flash).
3. Press the MANUAL/MEMORY button to select the memory location (color) where you want to save the new settings. Note: Each time the button is pressed, the memory indicator will change from red, to green, then yellow. Each color represents a different memory location.
4. Press and hold the MANUAL/MEMORY button for at least two seconds again. The new settings are now saved into the selected memory location.
1. Adjust the TYPE, WAH RANGE, and DRIVE knobs until the desired sound is achieved.
2. Press and hold the MANUAL/MEMORY button for at least two seconds, then release it- (the MEMORY indicator will flash).
3. Press the MANUAL/MEMORY button to select the memory location (color) where you want to save the new settings. Note: Each time the button is pressed, the memory indicator will change from red, to green, then yellow. Each color represents a different memory location.
4. Press and hold the MANUAL/MEMORY button for at least two seconds again. The new settings are now saved into the selected memory location.