The VS-880 allows you to edit certain frequencies using a 2 or 3 Band EQ. When using the 2 Band EQ all 14 EQ switches (6 Inputs and 8 Tracks) can be accessed simultaneously. When using the 3 Band EQ a total of 8 EQ switches can be access simultaneously. You can only change EQ Bands in Input Mix or Track Mix Mixer Modes, but not in Input Track.
Change from 2 Band EQ to 3 Band EQ perform the following instructions:
- Ensure you are in Input Mix or Track Mix Mixer Mode by holding SHIFT and pressing the SELECT button on Mixer Mode.
- Hold SHIFT and press one of the following buttons: CH EDIT 3, 4 or 5.
- Press LEFT PARAMETER until you see EQ SWITCH.
- Turn the TIME/VALUE dial to turn on or off the desired 8 EQ Switches.
- Press the MASTER/EDIT SOLO button several times until you see EQ SEL=2 BAND.
- Turn TIME/VALUE dial to change to 3 Band.
If the EQ Switch does not change to 3 Band ensure there are no more than 8 EQ Switches in the ON
position. Repeat Steps 1-3.