It's important to choose the appropriate Output Selection so it matches as close as possible to what the GT-8 is connected to. For example, if you have the GT-8 connected to a PA system, you would choose "LINE/PHONES". Use the following steps to set the Output Select:
1. Press OUTPUT SELECT so it's lit.
2. Turn the PATCH/VALUE dial to select the type of device connected to the GT-8:
JC-120: When connected with a Roland JC-120 amp.
SMALL AMP: When connected with small or "practice" guitar amp.
COMBO AMP: When connected to a Combo Amp.
STACK AMP: When connected to a Stack Amp.
JC-120 RETURN: When connected to the return on a JC-120.
STACK RETURN: When connected to the return on a stack amp.
LINE/PHONES: When connected to headphones, PA, MIXER, or recording device.
3. When finished, press EXIT.
1. Press OUTPUT SELECT so it's lit.
2. Turn the PATCH/VALUE dial to select the type of device connected to the GT-8:
JC-120: When connected with a Roland JC-120 amp.
SMALL AMP: When connected with small or "practice" guitar amp.
COMBO AMP: When connected to a Combo Amp.
STACK AMP: When connected to a Stack Amp.
JC-120 RETURN: When connected to the return on a JC-120.
STACK RETURN: When connected to the return on a stack amp.
LINE/PHONES: When connected to headphones, PA, MIXER, or recording device.
3. When finished, press EXIT.