In an effort to support more CD-ROM drives with the CD-Player function, Roland added 7 additional drivers into the S-760's system software versions 2.19 and higher. If your CD-ROM player does not work with the CD Player function, this system update may be able to support the drive by allowing you to try several common audio CD drivers.
* While you are performing the following procedure, it is possible that the S-760 or CD-ROM drive might malfunction, causing the S-760 to lock up. Be sure to save any data in the S-760 to disk before attempting this operation.
To Enable the CD-Player Function with the New System Disk:
- Restart the S-760 with the new system disk (2.19 or higher).
- Go to the System Mode, and select the SCSI page.
- Set the CDP Drive Type to 1.
Using the CD-Player Function:
- Insert an audio CD into your CD-ROM drive.
- Go to the Performance Play page.
LCD + Front Panel - Press the Command button.
- Use the CURSOR buttons to select 8: CD Player and press S1/Dec to display the CD Player page.
- Press S1/DEC (list button). A list of the SCSI devices connected to the S-760 will be displayed.
- Move the cursor to the SCSI ID of your CD-ROM drive and press S1/DEC (sel). The CD-ROM drive will be selected as the current drive.
CRT + Mouse - Click on Com (Command) in the right upper corner.
- A list of Performance functions will be displayed. Click on CD Player to display the CD Player page.
- Click on CD-ROM or ???. A list of the SCSI devices connected to the S-760 will appear.
- Click on the desired CD-ROM drive on the list. The CD-ROM will be selected as the current drive.
LCD + Front Panel & CRT + Mouse - The new driver that you have selected may be able to display Track, A-Time and P-Time when using the CDPlayer function. Try the CD Player function using the transport controls on the screen (if you are using a monitor) or the F2 button (if you are using the front panel and LCD). If the Track, A-Time and P-Time are not displayed or the functions lock up, try another audio CD driver, repeat the above steps, and try again.
After you find the correct driver for your CD-ROM be sure to update your System Parameters using the System Save/Load Parameters screen in the System Mode.
* Make sure to connect the audio outputs of your CD-ROM drive to the inputs of the S-760 to sample your audio CD.