Use the following procedure to save your system settings:
1. Press SYSTEM so it is lit.
2. Press UTILITY so it is lit.
3. Press ENTER to save the current settings.
NOTE: If "WRITE PROTECT Internal: ON" is displayed, turn the VALUE Dial to change the setting to OFF. Then press ENTER.
4. Press ENTER again to save the settings.
1. Press SYSTEM so it is lit.
2. Press UTILITY so it is lit.
3. Press ENTER to save the current settings.
NOTE: If "WRITE PROTECT Internal: ON" is displayed, turn the VALUE Dial to change the setting to OFF. Then press ENTER.
4. Press ENTER again to save the settings.