The Roland VH-11 Hihat is compatible with the TD-4 module. Follow these steps to setup the VH-11 and make the proper adjustments:
- Connect the TD-4's "HH" cable to the TRIGGER OUT jack on the VH-11.
- Connect the TD-4's "HHC" cable to the CONTROL OUT jack on the VH-11.
- Make sure the top of the VH-11 pad is not touching the motion sensor unit, and turn on the TD-4.
- Loosen the clutch and let the VH-11 pad rest on the motion sensor.
- Press the MENU button so it is lit.
- Press the SEL down button to select "PAD SETTINGS".
- Press OK.
- Hit the VH-11 - "HH" appears in the upper right side of the display.
- Turn -/+ dial to choose "VH-11."
- Press SEL down to choose "HH Pedal Sens".
- As you watch the indicator in the lower left of the display, turn the VH-11's adjustment nut until the indicator lines up between to two brackets.
- When you're finished, press MENU and readjust the hihat clutch.