VK-8: Using Octave Shift on the VK-8

Use the following procedure to change octaves on the "OTHER" instruments on your VK-8:

1. While holding down the HARMONIC BAR PART UPPER and
PEDAL buttons, press the PRESET button. Then release all buttons.

NOTE: Buttons 1 – 5 will begin blinking.

2. Press button #3.

3. Turn the VIBRATO AND CHORUS knob to shift the octave.

NOTE: The octave can be shifted 3 octaves up or down.

NOTE: To return the octave shift to normal, press the VIBRATO AND CHORUS ON button.

4. Press the WRITE button to finalize the setting.

NOTE: You can save the setting in a preset if desired.