There are three software items to install from the included SONAR VS Installation DVD-ROM and the SONAR V-STUDIO 100 Driver CD-ROM:
SONAR VS Installation DVD-ROM contents:
- VS Production Pack
- Guitar Rig 3 LE
SONAR V-STUDIO 100 Driver CD-ROM contents:
- SONAR V-STUDIO 100 drivers for PC and Mac
NOTE:
• When installing, you must log on as a user with administrative privileges on your computer.
• Close system monitoring/anti-virus software before installing. If system monitoring software such as anti-virus programs are installed on your computer, you must close them until you’ve finished installing SONAR.
SONAR VS Software and VS Production Pack Software Install:
- Close down all software on your computer.
- Disconnect any USB connecting devices—except your keyboard and mouse. This includes any hubs, external drives, etc.
- Place the SONAR V-Studio 100 Installation DVD-ROM into your disc drive. A window will appear with the "VS Production Pack" install icon.
Note: if a window does not appear with the “VS Production Pack” icon, double-click on the “VS-100 DVD” disc icon on your desktop.
- Double-click on the “VS Production Pack” icon and then proceed with the on screen installation instructions.
The VS Production Pack is now installed. At this point, proceed to the “VS-100 Driver Install” below.
VS-100 Driver Install:
NOTE: Updated VS-100 drivers can also be downloaded from the Roland website by clicking here.
- Close down all software on your computer.
- Disconnect any USB connecting devices—except for your keyboard and mouse. This includes any hubs, external drives, etc.
- Place the SONAR V-STUDIO 100 Driver CD-ROM into your disc drive. A window will appear with the CD-ROM contents in the window.
Note: if a window does not appear, double-click on the “VS-100” disc icon on your desktop.
- Open the “Driver(MacOS X)” folder.
- Double click the installer (“VS100USBDriver.pk”) file to begin the driver installation.
Note: In some cases, the display will indicate "This Installer package needs to run a program to determine if it can be installed. Do you want to continue?" or "This package contains a program that determines if the software can be installed. Are you sure you want to continue?"; click “Continue”.
- The display will indicate "Welcome to the VS-100 Driver Installer"; click “Continue”.
- If the display indicates "Select a Destination," click the drive on which the system is installed and then click “Continue”.
- The display will indicate "Easy Install" or "Standard Install"; click “Install” or “Upgrade”.
- The display will indicate "Installing this software requires you to restart..."; click “Continue Installation”.
- The display will indicate "Click Restart to finish installing the software"; click “Restart”. Your computer will restart and the driver installation will be complete.