The following example will guide you through the proper settings to monitor incoming audio in real-time for a connected guitar:
-
Lower the PHONES knob completely counter-clockwise.
-
Connect your guitar to INPUT2 (GUITAR) on the back panel of the TRI-CAPTURE.
-
Turn the volume up all the way on your guitar itself.
-
Press the HI-Z button inward.
-
Raise the INPUT2(GUITAR) knob to about 3 o'clock (pointed to the right).
-
Press the REC MODE button until "ALL INPUTS" is selected.
-
Press the
switch so that the button is pressed outward (ON). -
Press the
switch so that the button is pressed inward (ON). -
Connect headphones to the PHONES jack or speakers to the L-OUTPUT-R jack.
Note: if you have speakers connected, be sure that their power is on and their volume is down. -
Play your guitar and slowly raise the PHONES knob (if using headphones) or your speaker's volume (if using speakers) to hear the guitar.
You may now setup the TRI-CAPTURE driver within your software for recording.