The following article will walk you through recovering backup data back into the BR-1600CD.
- Insert a CD-R/RW disc containing an HDD backup or a SONG backup into the BR-1600CD’s CD-R/RW drive. The drive’s access indicator will begin to flash. Wait until this indicator stops flashing and turns off before proceeding.
Note: If your backup contains multiple discs, be sure to insert Disc #1 first when recovering projects--this is the first CD disc that you inserted when initially performing the backup. - Press CD-R/RW [DATA SAVE/LOAD].
- Press [F2] (RECOVER) and then press [ENTER/YES].
- The next step will depend on how you backed up the data.
a. If you backed up the entire hard drive all at once by selecting “HDD” when you backed up:
i. Press [F3] (HDD) press [ENTER/YES]. The message “HDD Recover OK?” will appear.
ii. Press [ENTER/YES].
b. If you backed up individual songs by selecting “SONG” when you backed up:
i. Press [F1] (SONG) or move the cursor to SONG, and then press [ENTER/YES]. A list of the CD-R/RW disc’s backup songs will be displayed.
ii. Move the cursor to the song you want to recover and then press [F1] (SELECT). The song will selected for recovery. Note: A number of songs can be selected in this way for recovery, and an asterisk (*) will be displayed for each selected song. Additional Note: If you would like to recover all of the songs on the CDR/RW disc in a single operation, press [F2] (ALL). All songs will be selected for recovery.
iii. When you have selected all of the songs you want to recover, press [F4] (GO).