MICRO BR BR-80: Erasing Part of a Track

The following article will guide you through erasing a portion of a track that was recorded in Multitrack Mode:

1. Press UTILITY.
2. Press TR2 (TRK).
3. Press TR3 (ERS).
4. Use the CURSOR and VALUE buttons to select the track to be erased.
5. BY TIME: If you would like to erase a portion of the track by TIME (i.e. hours, minutes, seconds and frames):
   1. Press TR2 (TIM).
   2. Use the CURSOR and VALUE buttons to set the starting time ("ST") of the track's audio that you are erasing.
   3. Press TR4 (NEXT).
   4. Use the CURSOR and VALUE buttons to set the ending time ("En") of the track's audio that you are erasing.
   5. Press TR4 (NEXT) and continue to step 6.
6. BY MEASURE: If you would like to erase a portion of the track by MEASURE:
   1. Press TR2 (MEA).
   2. Use the CURSOR and VALUE buttons to set the starting measure ("Start Meas") of the track's audio that you are erasing.
   3. Press TR4 (NEXT).
   4. Use the CURSOR and VALUE buttons to set the ending measure ("End Meas") of the track's audio that you are erasing.
   5. Press TR4 (NEXT) and continue to step 6.
7. Press TR4 (YES).
8. Repeat steps 4 through 6 for any remaining tracks that you would like to erase.