You can use the Punch In/Out feature on the MICRO BR to precisely record "punches" automatically at points you specify. This can be useful for recording a certain section over and over again until the performance is right or for recording yourself without having to use your hands to Punch In and Out.
- Move to the point in time where you want the punch in to occur and then press the [A<>B] button
. - Move to the point in time where you want the punch out to occur and then press the [A<>B] button.
- Press [TR2] (AUT)
. The region you specified with the [A<>B] button will be the auto punch-in/out region. - Press one of the [TR1]–[TR4] buttons
. - Press the CURSOR buttons
several times to access the Rec Track screen. - Press one of the [TR1]–[TR4] buttons . to make “REC” appear for track you would like to record to.
- Press [EXIT].
- Move to a location slightly earlier than the Punch-In point at which you want to begin recording.
- Press the red record button
to enter record-standby mode - Press the play button
to begin record. Recording will not actually begin until you've reached the point you specified as the punch-in location. - When you have finished recording, press the stop button
.