-
Press the [ARRANGE/PATTERN/OFF] button until the button is blinking.
-
Press the EDIT button.
-
Use the CURSOR buttons to select the "P" (for Preset of the factory patterns) and use the TIME/VALUE dial to change the P to an S (stands for the Song bank of you patterns). Now choose an empty pattern by cursoring one field to right with your right CURSOR button and TIME/VALUE dial.
-
Use the CURSOR buttons to select "REAL" and press ENTER.
-
Use the CURSOR buttons and TIME/VALUE dial to make the desired settings for the Pattern.
-
Raise the "Master fader" and the "Rhythm fader" until you can hear the click track. The REC button will be flashing red.
-
Press the RECORD button a second time to begin recording.
-
Use REC TRACK buttons to input the drum sounds (directly beneath each track fader).
-
If you make a mistake, you can delete the wrong note or notes by holding down the DELETE/MUTE button and the REC TRACK buttons of the instrument that you want to delete.
-
When you are finished recording the pattern, press the STOP button.
- Press EXIT twice. Your patterns will be saved automatically.
