-
Press the INPUT SELECT that corresponds to the input or inputs that you have microphones or instruments connected to.
-
Adjust the INPUT SENS knob that corresponds to the inputs that you are plugged into.
-
Adjust the INPUT LEVEL knob so that the IN meter on the LCD is showing levels close to -4db.
-
Turn up the MASTER fader to the black area of the fader position.
-
Begin playing audio from the 4-track cassette. Verify that audio is being received above the "L R" meter on the bottom right inside of the BR-900CD's screen.
-
Place a blank CD into the disk drive and close the tray.
-
Press the REC MODE button, to the left of the screen, until "BOUNCE" appears inside the screen.
-
Use the CURSOR buttons to move the cursor so that it is under "78" in the upper right corner of the display.
-
Turn the VALUE dial clockwise to choose "CD."
-
Press REC - wait momentarily for the CD to prepare - "Keep power on, now checking.../Creating Track" appears in the display.
NOTE: If you do not want the audio from recorded tracks to be burned onto the CD and only want a connected microphone or instrument to burn to CD, simply turn down the TRACK MIXER volume sliders. -
Press PLAY when you're ready to bounce the tracks.
-
Press STOP when the song is finished.
