If you're using a computer that is not connected to the Internet, or if the driver isn't downloaded automatically, then download the driver for Windows 10/11 manually. The following article will guide through manually downloading and installing the driver for the OCTA-CAPTURE 10/11.
IMPORTANT NOTES
- Before installing the driver, the OCTA-CAPTURE system program must be updated to the latest version (Ver.1.5.0 or later). The unit's version number will appear on the OCTA-CAPTURE's screen upon startup. If the version that appears on the screen is not at Ver 1.5.0 or later, download the "OCTA-CAPTURE System Update" from the link below:
https://www.roland.com/us/products/octa-capture/downloads/
(Installation instructions are included in the download). - Be sure that your OCTA-CAPTURE is not in VS Expand mode:
-
- Press and hold the DISPLAY button for a few seconds. The SYSTEM menu appears.
- Turn the CURSOR/VALUE dial to select “VS EXPAND” and the press the CURSOR/VALUE button inwards.
- If the VS EXPAND is set to “ON”, turn the CURSOR/VALUE dial to select “OFF” and then press the dial inward to confirm the selection.
- Turn off the OCTA-CAPTURE and then power the unit back on.
-
DOWNLOADING THE DRIVER FOR WINDOWS 10/11
Download the driver from the link below:
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
The installation method for the driver is described in the README.txt file created after expanding the archive file. Before attempting to install the driver, be sure to read the README.txt file.
Note: If a message about "Windows SmartScreen" is displayed when installing or executing the software, please perform the following procedures.
- Click the [ More info ].
- Click the [ Run anyway ].
ACTION TO TAKE AFTER INSTALLING
For information on what to do after installing the driver, refer to Readme.htm, which is created after installation.
* Please be aware that the information in the Readme.htm related to "installing" is based on the case where the driver is automatically downloaded over the Internet.
* The information in Readme.htm might differ from what is on this page. For the most up-to-date information, refer to this page.
* Please be aware that the information in the Readme.htm related to "installing" is based on the case where the driver is automatically downloaded over the Internet.
* The information in Readme.htm might differ from what is on this page. For the most up-to-date information, refer to this page.