FR-1x, FR-1xb: How to save a user program

User programs allow you to save various settings to one register, so that you can recall them all with the touch of a button instantly.

Please use the following procedure to save a user program:

1. Select all of your desired settings; tones, drums, etc.
2. Press and hold the [USER PROGRAM] button to select write mode.
   
   The display now shows a flashing “U––” message.
   
3. Press the treble register ([1]~[4]) that is assigned to the User Program memory where you want to save your settings.*
   
   * There are 2 user program memories available for each register.  To access the    second memory slot, press the register twice.
4. Press the [SET] register to save your settings in the User Program memory you selected in step 3 above.
5. Press the [USER PROGRAM] button again to leave this mode.
   The USER PRG indicator below the display goes dark to indicate that the FR-1x is no longer in User Program mode. At this point, the FR-1x returns to the settings you were using before selecting User Program mode, and the display once again shows the main page.