The Process
The MX-1 contains 10 different types of Tone/Filter settings. By default, each Tone/Filter knob is set to "FILTER 1." To change the mode, follow the steps below:
- Press the [TONE] button to make it light.
- Press the [SELECT] button of the channel which you want to apply; the button lights.
- Turn the [VALUE] knob to select the type.
Mode List
| 1 |
FILTER 1 (FL1) |
Low pass and high pass filters are applied. |
| 2 |
FILTER 2 (FL 2) |
|
| 3 |
TONE 1 (Tn1) |
The volume of the low frequency and high frequency region is changed. |
| 4 |
TONE 2 (Tn2) |
|
| 5 |
EQ LOW 1 (Lo1) |
The volume of the low frequency range is changed. |
| 6 |
EQ LOW 2 (Lo2) |
|
| 7 |
EQ HI1 (Hi1) |
The volume of the high-frequency region is changed. |
| 8 |
EQ HI2 (Hi2) |
|
| 9 |
9 ISOLATOR 1 (iS1) |
The low frequency and high frequency regions are cut. |
| 10 |
ISOLATOR 2 (iS2) |
The low, mid, and high frequency regions are cut. |