For the RV-200, only Manual and the first four Memories are available to use at default.
In the RV-200 System Menu, you can change the Memory Extent maximum and minimum, to increase the number of available user customizable Memories accessible. Change the maximum value by setting the EXTENT FROM (ETF) and adjust the minimum with the EXTENT TO (ETT)
(For reference, review p. 13 of the RV-200 Owner's Manual)
As example, we want to have access to Memory: 1 to 8
- Press the [DENSITY] and [MEMORY] buttons at the same time to access MENU mode.
The unit enters MENU mode. - Turn the [TIME] knob to select the 'Ett' parameter (Memory Extent To), and then press the [TIME] knob. The value is displayed.
- Turn the [TIME] knob to edit the value to 'M-8' (Memory 8)
- Press the [TIME] knob.
- Press the [DENSITY] and [MEMORY] buttons at the same time to exit Menu mode.
Now you can switch from Manual, M-1 to M-8 and back to Manual, etc...
Notes:
- The maximum number of Memories available is Manual and Memory: 1 to 127
- All Info: RV-200 Support
- Further increase your foot control capability by incorporating a BOSS FS-6 or FS-7 Dual A/B pedal for CV foot control to toggle/shuffle through the Memory patches that are user customized, Manual and Memory 1 to 127.
- Additionally, an alternate MIDI method, would be to use an external MIDI MASTER CONTROL pedal/device to shuffle through the Memory patches, similar to the FS-6/FS-7,
the user can access, Manual and Memory: 1 to 127.