Low volume levels on mixes or bounces are usually due to lower mixdown levels when Bouncing. In the BR-600, look at the “L R” level while Bouncing and be sure that the meter is averaging as close to 0dB as possible--without going over and distorting:
To view the level meter:
- Press EXIT few times to view the main screen.
- Press the CURSOR DOWN button 2 times.
- While Bouncing, be sure that the meter is averaging as close to 0dB as possible.
- If the "L R" meter is too low, Bounce the song(s) again with the “L R” meter level higher. This can be accomplished by raising the individual track faders and/or raising the MASTER fader when Bouncing. This will allow the hottest volume levels possible to be Bounced.