When sequencing with the JD-Xi, you can set the pattern length from 1 to 4 bars. Here are the steps to make this setting:
- Press MENU.
- Use the Cursor </> buttons to select "Pattern Length" and press ENTER.
- Use the value +/- buttons to select 1, 2, or 4 measures, then press ENTER.
- Press ENTER again to confirm the setting.
If you have a pattern longer than 1 measure, you will need to select which measure you are viewing for editing. To do this, hold the SHIFT button and press the 01, 02, 03, or 04 buttons to select the desired measure to view and edit. The available buttons will be lit and the selected measure will be blinking.