When connecting the RT-series acoustic triggers to the TD-10, you'll want to setup the Trigger Type as well as other sensitivity parameters. Here are the details to do this:
1. Press SETUP.
2. Press F1 (TRIG).
3. Press F1(BANK).
4. Hit the trigger, or select the input, and then turn the VALUE dial to select the Trigger Type.
For the RT-Series triggers, choose the following Trigger Types:
KICK (Acoustic Drum Trig)
SNARE (Acoustic Drum Trig) or "12B"
TOM (Acoustic Drum Trig) or "12B"
FLOOR TOM (Acoustic Drum Trig) or "12B"
6. When you're finished setting the Trigger Type, you can press F2 (BASIC), and adjust the sensitivity parameters as needed.
Here are further recommended sensitivity settings, however it's best to adjust them so they work well based on your particular playing style and setup;
Sensitivity = 8
Threshold = 5
Curve = Linear
ScanTime = 2.0
RetrigCancel = 10
MaskTime = 12
XtalkCancel = 60
MountType = PadMount
7. After completing the setup, press the KIT button to exit. The new settings are saved automatically.