Here's how to setup a CY-13R to be used with the TD-11:
- Connect the "RD" cable to the BOW/EDGE Output on the pad.
- Connect the "CR2" cable to the BOW/BELL output.
- Press the MENU button.
- Use the cursor up / down buttons to highlight the "SYS" icon.
- Press Function button 3 (ENTER).
- Press the cursor down button to choose "Pad Settings," and then press ENTER.
- Press button 3 again (TYPE).
- Hit the CY-13R pad, and then turn the dial to choose "CY 13R" for the Pad Type.
- When you're finished, press EXIT. The new settings are saved automatically.