There two ways for setting up Tap Tempo to be assigned to the CTL pedals:
SYSTEM BASED -
With this method you will be assigning whichever of the two CTl pedals you wish to be a dedicated Tap Tempo switch. This means that whichever patch you are on at any given point, the assigned CTL pedal will always be Tap Tempo.
To change the GP-10's CTL Pedal 1 or 2 to a System based assignment to TAP TEMPO:
1. Press the SYSTEM button.
2. Press the Page Right arrow till you get to the screen that
says:
SysCtl:CTL1 Func/
3. Turn the PATCH/VALUE knob until the function on the
screen says:
TAP TEMPO
PATCH BASED -
With this method you will be assigning whichever of the two CTl pedals you wish to be a dedicated Tap Tempo switch, but only doing this assignment on a patch by patch basis.
To change an individual patch's assignment to TAP TEMPO:
1. Tap the EFFECTS button until the screen says:
Ctl:CTL1 Func
2. Turn the PATCH/VALUE knob until the function on the
screen says:
TAP TEMPO