Below are the Steps to reset the SY-300 back to its factory-set state.
Note: Performing a Factory Reset will permanently erase all user/custom memory locations and settings. Please backup any user customized patches to the BTS for SY-300 software editor app Librarian, prior to performing the Factory Reset. The current installed firmware version will not be affected by the reset procedure. If you have recently performed a version update on the SY-300, it's recommended to perform a Factory Reset immediately after the firmware update process.
- With the SY-300 powered ON, press MENU.
- Turn SELECT knob to choose SYSTEM.
- Press SELECT knob.
- Turn SELECT knob, navigate and select FACTORY RESET.
- Press the SELECT knob as button to enter FACTORY RESET menu.
- In the FACTORY RESET menu use the parameter KNOB 1 to specify the reset range.
SYSTEM, PATCH, or SYSTEM + PATCH that will be returned to their factory-set state.
For a full reset choose SYSTEM + PATCH = ALL SETTINGS - Press the [WRITE] button.
If you decide to cancel without executing, press the [EXIT] button. - If you want to proceed with the Reset, press the SELECT knob to confirm Factory Reset.