Use the following procedure to restore settings from a backup on a computer into the JU-06:
Note: This procedure will over-write the settings in the JU-06, so you should back up any important data before proceeding.
- While holding down the BANK 2 button, turn on the power.
- Connect your computer to the JU-06’s USB port via USB cable.
- Open the “JU-06” drive on your computer.
- Copy the backup files on your computer to the "RESTORE" folder in the "JU-06” drive.
- After copying is completed, eject the USB drive and then press the MANUAL button on the JU-06.
- After the LEDs have stopped blinking, turn the JU-06 power off.