Once you have backup up your settings on the RD-700NX (either to internal memory or to a USB key), you can use the following procedure to restore / re-load them into the RD-700NX:
NOTE: This procedure will over-write the 100 Live Sets in the RD-700NX, so you should back up any important settings / Live Sets before proceeding.
1. Press MENU.
2. Use the the Cursor up / down (^/v) buttons to select “5.File,” then press ENTER.
3. Use the Cursor up / down (^/v) buttons to select “1. Live Set Load,” then press ENTER
4. Press the LAYER EDIT (MEDIA) button to select the load destination for the Live Set file (either Internal or USB). If you select USB, you will need to have a USB memory key with the backup file connected to the USB MEMORY port on the back of the RD-700NX.
5. Press TONE EDIT (System) if you also wish to load the system settings from your backup file.
6. Use the Cursor up / down (^/v) buttons to select the Live Set file that you wish to load, then press ENTER.
7. Press ENTER again to confirm the operation and load the Live Set file.
8. Press the MENU button to return to the main screen.
NOTE: Do not turn off the power will the file is being loaded.