The JX-03 can connect to a computer so it can be integrated with music software applications. There are two ways to make this connection:
- Direct USB connection. This will use a USB cable connected to the Mini USB connector on the back of the JX-03 and then to a standard USB port on your computer.
or
- Connection using a MIDI or Audio/MIDI interface. This will use the MIDI In and MIDI Out ports as well as the 1/8th inch Stereo Output jack on the back panel of the JX-03, which will connect to the interface, and the interface will then connect to a standard USB port on your computer.
The functionality and operation of the JX-03 and your computer-based application(s) will be the same no matter which type of connection you are using - the only difference is how the MIDI and Audio signals are routed.
Connecting your JX-03 to a computer using the direct USB connection
- Download and install the JX-03 driver for your computer and connect the USB cable. You can download the latest drivers from our website here.
Make sure you download the driver that corresponds to the type of computer you have (Mac or Windows-based) and the version of operating system you are using. Once downloaded, you will need to run the setup application to install the driver into your system. This may include re-starting your computer. - Confirm that the USB driver is installed correctly and that the computer is communicating correctly with the JX-03.
- On a Macintosh, look in the Audio MIDI Setup utility and confirm that the JX-03 is listed in both the Audio and MIDI Studio windows (it will be listed as "Boutique").
- On a Windows PC, open the Device Manager and confirm that the JX-03 is listed under "Sound, video, and game controllers" - it will be listed as "Boutique."
- Activate or enable the JX-03 in your music software. You will need to consult with the documentation for your specific application for this, but usually there is a preferences menu where you will need to enable the JX-03 so it can be used by your software.
This will allow you to transfer both MIDI and Audio data between the JX-03 and your computer.
Connecting your JX-03 to a computer using a separate MIDI or Audio/MIDI interface
- Download and install the USB driver for your the interface (if necessary).
- Confirm that the USB driver is installed correctly and that the computer is communicating correctly with the interface.
- On a Macintosh, look in the Audio MIDI Setup utility and confirm that the interface is listed in both the Audio and MIDI Studio windows if it is a Audio and MIDI interface, or only in the MIDI Studio window if it is a MIDI interface.
- On a PC, open the Device Manager and confirm that the interface is listed under "Sound, video, and game controllers."
- Activate or enable the interface in your music software. You will need to consult with the documentation for your specific application for this.
- Connect the JX-03 to the interface (you will need 2 MIDI cables and an audio cable).