1. Press EDIT until PATCH is displayed.
2. Press ENTER.
3. Press Right Arrow until PATCH MIDI 1 is displayed.
4. Press ENTER.
5. Select desired MIDI channel under "CH" (MIDI Channel).
6. Press Right Arrow until cursor is under “PC” (Program Change)
7. Select desired Program Change number.
8. Press Right Arrow.
9. Under CC# Specify whether a control change is also transmitted
when you switch patches.
10. Press WRITE three times to save changes.
11. Program Change will be sent to configured loops the next time
this ES-8 Preset is recalled.