The JUNO-DS61, JUNO-DS76, and JUNO-DS88 can install expansion sound sets downloaded from the Axial website (http://axial.roland.com/). This data is not available through Roland Cloud. How you load the downloaded file depends on its file type.
Loading a .bin file (EXP-01 – EXP-10)
What you'll need: a commercially available USB flash drive, 32 GB or smaller. Watch the video below, or follow the steps to load the file into the JUNO-DS.
- Download the EXP expansion sound set (EXP-1 – EXP10) from the Axial website.
- On your computer, unzip the downloaded file, then copy the sound file ("EXPxx.bin") to the root directory of a USB flash drive.
- Connect the USB flash drive to the JUNO-DS with the power off.
- While pressing the NUMERIC button, turn on the power of the JUNO-DS.
The Wave Update Mode will be activated and the screen will display the wave expansion data (e.g. "EXP-01"). - Select the wave expansion data and press ENTER.
- When the screen displays "Are you sure?" press ENTER to load the sounds.
If you would like to start over, press EXIT. - When the JUNO-DS is loading the sounds, "Writing..." will be displayed on the screen (it will take approximately five minutes to load the sounds).
When the JUNO-DS is done loading the sounds, "Complete" will be displayed on the screen. - Power the JUNO-DS off, then back on.
Loading a .jxl file (JUNO-DS Band Collection Vol.1–3, XV-5080 COLLECTION PRESET BANK A–G)
Use JUNO-DS Tone Manager to load the file. This requires installing the USB driver on your computer. See "Using JUNO-DS Tone Manager" for instructions.
JUNO-DS Tone Manager and the USB driver can be downloaded from the link below.
JUNO-DS UPDATES & DRIVERS