The JUNO-DS61/76/88 can install sound expansion sets downloaded from the Axial website (http://axial.roland.com/).
Here are the steps for downloading and installing an expansion sound set into the JUNO-DS:
* To load the XV-5080 COLLECTION, please use the JUNO-DS Tone Manager. For instructions on how to do this, please refer to "Using JUNO-DS Tone Manager".
- Download the EXP expansion sound set (EXP-1 - EXP10) from the Axial website.
Here is a link to the download page: JUNO-DS61/76/88 | Axial (roland.com) - Connect a USB memory key to your computer.
- Unzip / Decompress the downloaded file, then copy the sound file ("EXPxx.bin") to the root directory of the USB memory key.
- Disconnect the USB memory key from your computer, then connect it to the JUNO-DS with the power off.
- While pressing the NUMERIC button, turn on the power of the JUNO-DS.
The Wave Update Mode will be activated and the screen will display the wave expansion data (e.g. "EXP-01"). - Select the wave expansion data and press ENTER.
- When the screen displays "Are you sure?" press ENTER to load the sounds. If you would like to start over, press EXIT.
- When the JUNO-DS is loading the sounds, "Writing..." will be displayed on the screen (it will take approximately five minutes to load the sounds).
When the JUNO-DS is done loading the sounds, "Complete" will be displayed on the screen. - Power the JUNO-DS off, then back on.
The following video introduces how to download, install, and select expansion sounds.