The JUNO-DS61/76/88 allow you to change the USB Driver setting - the available options are:
- VENDER: This setting requires that you install a Roland USB driver on your computer for the JUNO-DS, and allows you to transfer both MIDI and Audio through the USB connection. This is the 'normal' setting used when connecting to a computer.
- GENERIC: This setting does not require a Roland USB driver to be installed (it instead uses the built-in driver in your computer's operating system), and is also referred to as "Class Compliant." This is a good option when a USB driver is not available for your computer, or when you are connecting to an iOS device.
Here are the steps to change the USB Driver setting on the JUNO-DS:
- Press MENU.
- Cursor to "System" and press ENTER.
- Use the </> buttons to select the "MIDI" tab at the top of the screen.
- Cursor to "USB Driver" and use the Value Dial to set this to "VENDER" or "GENERIC." You may need to cursor to "WRITE" on the display and press ENTER to save the setting and proceed.
- Power off then back on the JUNO-DS.