As there are two Display Modes available on the RC-1, your RC-1's display mode may
be set to a mode where the lights work a little differently than you're used to, or how
you have seen them look previously.
To check which Display Mode you are in:
1. While holding down the pedal switch, turn the power on. (To do this, connect a plug to OUTPUT A).
2. Press the pedal switch twice (leaving at least one second between presses).
The LOOP indicator lights up (mixed red and green lights), which indicates the
current display mode.
DISPLAY MODE EXPLANATIONS
UPPER half lit in Red and Green -
The rotational speed of the LOOP indicator reflects the length of the
recorded phase (default setting).
LOWER half lit in Red and Green -
The LOOP indicator rotates rapidly and alternates with the playback location (two
light segments blinking together).