The following steps enable access to the three different Stereo Out Modes available on the DD-7:
1. Make the connection to the INPUT-A (MONO) jack and leave
nothing connected to the INPUT-B jack.
2. Hold down the built-in pedal and insert the plug to INPUT-B jack.
(The setting mode for stereo delay should now be enabled, and the CHECK indicator
lights in orange.)
3. Select the stereo delay effect using the MODE knob to select the mode for
stereo delay.
3200ms: This is a completely independent delay for A and B.
800ms: This is panning delay.
200ms: This is a stereo delay that imparts spatial broadness
to reverberant sound.
4. Save the settings:
Press the built-in pedal switch to make the CHECK indicator
rapidly flash in orange and save the settings.
After the settings have been saved, the unit returns to normal operation.