ES-8: Control Both Expression Outputs From A Single Expression pedal

Control two devices connected to Expression outputs with a single Expression pedal.

1. Connect an Expression pedal to Expression Input 1.
2. Connect a cable from the ES-8’s Expression Output 1 to the Expression Input of your first device.
3. Connect a cable from the ES-8’s Expression Output 2 to the Expression Input of your second device.
4. Press EDIT.
5. Press Left/Right arrow buttons to get to the CTL/EXP Menu.
6. Press ENTER.
7. Press Left/Right arrow buttons to get to the Assign 1 screen 
8. Press ENTER.
9. Press the + button to turn the Assignment on (SW).
10. Press Right Arrow to move cursor under the Src (SOURCE) parameter.
11. Press +/- until you get to the EXP1 selection.
12. Press Right Arrow to move cursor under the Cate (CATEGORY) parameter.
13. Press +/- to select the E.CTL option.
14. Press Right Arrow to move cursor under the Target parameter.
15. Press +/- to select the EXP2 option.
    You should now be able to control devices connected to the EXP1 and EXP2 Expression Outputs simultaneously from a single Expression pedal connected to EXP IN 1.