BRIDGE CAST X: How to stream video from a camera

The BRIDGE CAST X can stream video from a camera equipped with an HDMI output connected to the HDMI IN 1 or 2 connector.

Required Devices and Cables

• BRIDGE CAST X (dedicated USB driver must be installed)
• AC adaptor (5 V/3 A or 9 V/3 A)
• BRIDGE CAST app
• Computer
• Camera (HDMI supported)
• Microphone, headphones or headset
• USB cable (included)
• HDMI cable
• Voice chat app
• Live-streaming app
• (Optional) Monitor, speakers, video game console

Installing the dedicated app and connecting devices

1. Install BRIDGE CAST X driver and BRIDGE CAST app on your computers.
   https://www.roland.com/global/support/by_product/bridge_cast_x/updates_drivers/
2. Connect the microphone and headphones (headset) to the BRIDGE CAST X.
   See "Connecting to a computer/external equipment" in the BRIDGE CAST X Owner's Manual.
3. Use the included USB-C cable to connect the computer to the USB II port.
   *Connect other devices such as speakers as needed.
4. Use an HDMI cable to connect the camera to the HDMI IN 1 or 2 connector.
   

Settings for sound and video

1. Follow the steps in "Getting ready to use a mic" to set up the microphone.
2. Press the VIDEO [HDMI IN] button to select the HDMI IN connector to which the camera is connected.
3. (Optional) If you are using the audio signal fed from the camera, adjust the input level by using the [3] knob (HDMI channel).

Settings for streaming app (OBS)

1. Adjusts the STREAM MIX bus volume.
   See "OUTPUT section" in the BRIDGE CAST X Owner's Manual.
2. In OBS, click the three dots next to the Microphone volume gauge in the Audio Mixer, then select "Properties".
3. Select "STREAM(BRIDGE CAST X)" for Device.
   
4. Press the VIDEO [USB OUT] button of the BRIDGE CAST X to lit.
5. In the Sources Box of OBS, select the + and choose Video Capture Device, then select "Roland BRIDGE CAST X" for Device.