If the 'MOTION SENSING' is set as the condition for automatically returning back from the standby mode (detection method), then the transmitter's battery indicator will turn dark upon entering the standby mode.
The battery indicator status during the standby mode depends on the detection method, which can be set to MOTION SENSING (factory default) or SOUND SENSING. See below:
| Detection method | Explanation | State of the battery indicator |
|---|---|---|
|
MOTION SENSING (Vibration detection) |
If the transmitter that’s plugged into the guitar is powered-on, the unit automatically enters standby mode if no vibration is detected for a certain interval of time. |
Unlit |
|
SOUND SENSING (Sound detection) |
If the transmitter that’s plugged into the guitar (instrument) is powered-on, the unit automatically enters standby mode if a silent state in which the guitar (instrument) is not played continues for a certain interval of time. |
Blinking green (every 8 sec.) |
* You can set the duration for the unit to automatically enter standby mode using the BTS for WAZA-AIR app (available on iOS and Android). SYSTEM > STANDBY SETTING
* When you change the setting, plug the transmitter into the WAZA-AIR unit. AUTO WIRELESS CONNECTION will operate, enabling the setting.