There are two types of user settings that can be backed up and restored:
- System Settings: Various settings for the unit itself
- Scene Settings: The settings for each part, settings that are common to all parts, user settings stored the entire state of performance settings including assignments for the controllers and MIDI control settings, etc.
Select it in step 3 of the backup or restore operation.
Perform the steps below:
This operation requires a USB flash drive (USB Type-C) formatted on the AE-30 unit.
Backup the System Settings / Scene Settings
- While pressing the [MENU] button, turn on the power.
Keep pressing the [MENU] button until the Roland logo disappears. - Connect the USB flash drive to the USB connector.
- Use the [<] [>] buttons to to display "System Backup" or "Scene Backup", and press the [MENU] button.
- Press the [>] button to select "YES".
To cancel, press the [<] button to select "NO". - Use the cursor buttons and [S1] (Insert) / [S2] (Delete) buttons, name the backup file.
- Press the [MENU] button.
"Write OK?" is displayed on the screen. - Press the [>] button to select "YES" and execute the backup.
To cancel, press the [<] button to select "NO".
"Writing..." is displayed on the screen and the backup operation is executed.
When the operation is finished, "Complete" appears and then the display returns to the System Backup screen. - Turn off the power and disconnect the USB flash drive.
Restore the System Settings / Scene Settings
- While pressing the [MENU] button, turn on the power.
Keep pressing the [MENU] button until the Roland logo disappears. - Connect the USB flash drive to the USB connector.
- Use the [<] [>] buttons to to display "System Restore" or "Scene Restore", and press the [MENU] button.
- Press the [>] button to select "YES".
To cancel it, press the [<] button to select "NO". - Use the cursor buttons to select the backup file you want to restore, and press the [MENU] button.
A confirmation screen appears. - Press the [>] button to select "YES" and execute the restore.
To cancel, press the [<] button to select "NO". - "Writing..." is displayed on the screen and the backup operation is executed.
When the operation is finished, "Complete" appears and then the display returns to the System Backup screen. - Turn off the power and disconnect the USB flash drive.